Be the envy of every member of your flock! Parts are meant to be attached via magnets for comfort and quick removal. Crown measures 4.5 inches tall from circular edge to the top tips. This print results in a "follow me" eye for a nice effect. There is plenty of space inside to add a small LED for lighting. Prints easily with the flat portions facing the bed. The bottom disk/ring can be attached to a wig or strung up with elastic.
Your magnet choices may vary, but we recommend the D52-N52 magnets from KJ Magnetics: https://www.kjmagnetics.com/proddetail.asp?prod=D52-N52
For the light inside, a small button light works well. These have adhesive and a single on-off switch: https://amzn.to/40oPIxt
Original parts list: Crown of the Lamb - Plate Crown of the Lamb - Top Pupil_Crown
Updated parts list: Crown of the Lamb - Supports Eye of the Lamb Ring of the Lamb Pupil_Crown
STL files (in ZIP format) are available as-is and may have to be adjusted to your needs. Magnet wells are 9mm diameter in the file. All files are in STL format. Original digital sculpt created by Lightning and Lace. You will be able to download the file from your purchase page after checkout. This file and contents produced with it are meant for personal projects only and are not to be redistributed for profit either physically or digitally.
